Product introduction, usage and formula analysis of ceramic tile jointing agent

1、 Product features

The jointing agent is a cement-based joint material made of high-quality quartz sand, cement, redispersible emulsion powder and inorganic pigment,

It has good adhesion, flexibility and waterproof, impermeability, crack resistance, freeze-thaw resistance, cold and heat resistance, which can improve the resistance of the facing

The aging performance and long-term durability can overcome the characteristics of cracking, water seepage and falling off after joint pointing with ordinary cement mortar.

It can adjust different colors according to customer's requirements. It is a green environmental protection product.

2、 Product use

It can be used for pointing of facing materials such as interior and exterior tiles, floor tiles, marble, swimming pool wall tiles, granite, etc

Available. The product has good elasticity and can avoid cracking of sealant due to shrinkage of ceramic tile and base.

3、 Construction method

1 reference ratio water: sealant = about 1:4 (weight ratio)

2. Jointing shall be carried out after tiles or stones are pasted for nearly 24 hours.

3. The gap should be clean, and the gap prepared for pointing can be wetted in advance.

4. Fully mix the sealant and water with electric mixer (or manual) according to the proportion. It is required to mix it into viscous material without lumps and lumps. It can be used after standing for 5-10 minutes and stirring again. Use a hard sponge or scraper to press the slurry into the joint of the tile, so that the pointing material can fully stick to both sides of the joint.