Shandong chuangyao bio introduces the amount and construction method of tile glue

Ceramic tile adhesive is a kind of cement-based adhesive material used to paste ceramic tiles. Due to the addition of some fine additives, especially redispersible latex powder, its adhesion strength, water resistance, freeze-thaw resistance and aging resistance are greatly improved. In addition, environmental protection materials such as hydroxypropyl methyl fiber and hydroxypropyl starch ether are added to make the tile adhesive good and convenient for construction A popular decoration material. Today, Shandong chuangyao biotechnology will introduce the amount of tile glue and the construction method. Let's have a look at it!

1、 General standard of tile glue dosage

(1) The 10 mm toothed scraper is about 6.5 kg / m2

(2) The 3 mm toothed scraper is about 1.5 kg / m2

(3) 3.7mm/kg scraper

Suitable scraper can be selected according to the area of brick material and groove condition of brick back.

The dosage of 6 mm wide and 6 mm deep toothed scraper is about 3.5 kg / m2, that of 10 mm wide and 10 mm deep is 5 kg / m2, and that of 12 mm width and 12 mm depth is 7 kg / m2. With the common 20kg package, you can paste 3 to 7 square meters, so the specific area, and then determine the amount.

2、 Construction methods and precautions of tile glue

1. Toothed scraper will paste on the wall or the back of the ceramic tile, evenly distributed about one square meter, and knead and press the ceramic tile in 15 minutes. If adjustment is needed, it should be done before the tile glue is fixed.

2. Clean the construction surface first, and keep the surface solid, dry, clean and free of stains;

3. Pay attention to keep the expansion joint. The product is suitable for use in the environment of 5 ℃～ 40 ℃. Only after 24 hours of completion can the product step in or fill the joint.

4. Mix the ceramic tile adhesive into paste in clear water, the proportion is 25 kg, add water about 6-6.5 kg, after mixing fully, wait for about 10 minutes, then slightly stir for use, after 2 hours, do not reuse the dry glue.

With the application of ceramic tile adhesive more and more widely. The important additive of ceramic tile glue can redistribute the use of emulsion powder, so that the tile glue has good water retention property in the kitchen and toilet decoration, and is not easy to produce hollowing; the load-bearing of buildings is reduced from 11 ~ 18kg cement per square meter to 4 ~ 5kg of ceramic tile glue per square meter, so as to reduce the settlement and cracking of buildings. After reading the above introduction, do you know more about tile glue, or are you more curious about the additive of redispersible emulsion powder. Please pay attention to the product information of Shandong chuangyao Biotechnology Co., Ltd.